Page 2
CHARGE FIRST! Before using your new Power Station T-300 or after storing it for more than 3 months, plug it into a suitable wall outlet until it is fully charged.Then you can start your exciting journey with it.
SAFETY INSTRUCTIONS Read the following instructions to ensure safety before using. Improper use may result in fire, property damage or personal injury. Product use: • DO NOT use any inappropriate power cords. • DO NOT place the unit close to or in a fire on expose it to heat. Keep out of direct sunlight. •...
USB-C Output Anti-collision Strip Air Intake Vent with Cooling Fan Note: No user-serviceable parts inside. Recommended to fully charge the T-300 before use. BUTTON FEATURE A: T-300 Power ON/OFF Button B: SOS mode & LED light Button C: DC Output Power ON/OFF Button...
7-9 hours when car running From Wall Charger 110V 6-7 hours Do not connect device via ac output port while charge the T-300.recommend to disconnect the T-300 when fully charged. WHAT IT POWERS Laptops (41.4Wh) 32" TV(60W) CPAP without heated Gopro (5.9Wh)
Page 6
AC Adapter Charging AC Adapter Charging It will take 6-7 hours to charge fully by using the AC adapter we provided. AC Outlet AC Adapter Solar Panel Charging Solar Panel Charging 1、DO NOT charge the unit via solar panel that operate voltage outside of DC12-26V 2、Place Solar Panels in direct sunlight as much as possible.
“POWER ON/OFF” Button to shut down the output(s) when not in use. COOLING FAN T-300 utilizes an internal cooling fan to ensure the product is operating within the appropriate temperature range. T-300,when it experiences a higher output load, will automatically turn on the fan during discharge or recharging , the fan may operate intermittently to keep internal temperature within operating range.
Page 8
5-7 hours.When charging, the LCD Screen will be illuminated, and the LCD display will provide Battery level Indicator, T-300 is fully charged when the level is 100%. It is recommended to fully charge T-300 every 3 months to maintain the health of the battery pack.
Allowing the device to return to the environment before charging or other devices. NOTICE Transportation: The Intelligent Energy power station meets all legal requirements for the transportation of dangerous goods. The capacity of the lithium battery pack exceeds 100Wh. According to international standards Standard, if the Intelligent Energy power station is transported by air, it must be transported in accordance with IATA standard packaging.
Page 10
DO NOT CONNECTED DEVICE VIA AC OUTPUT WHILE CHARGE THE T-300. OVERLOAD CONDITION If an overload condition occurs on the OUTPUT port, T-300 will: Automatically turn off AC Output(6)power. The blue indicator light of LCD Screen(1)still illuminated. DC OUTPUT Status J still the same status as usual.
Copyrighted equipment. all rights reserved. All trademarks cited here are the property of their respective owners. The information contained in this agreement is subject to change without notice. The Intelligent Energy is not responsible for technical or editorial errors or omissions contained in this agreement.
EXCLUSIONS Intelligent Energy ‘s warranty does not apply to 1) any product that is modified, misused, abused, damaged by accident, or used for anything other than normal consumer use as authorized in Intelligent Energy current product literature or 2) any product purchased through an online auction house.Intelligent Energy...
FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 15
NOTE: A photovoltaic panel as an input for charging the internal battery shall be provided with an inverter and/or a charge controller in accordance with UL 1741 or UL 62109-1; The external power supply shall be a power source in accordance with the Standard UL 60950-1 and CAN/CSA C22.2 No.
Need help?
Do you have a question about the T-300 and is the answer not in the manual?
Questions and answers