Xtrfy M4W-RGB Quick Start Manual

Function layout

Xtrfy M4 Wireless Mouse
1
4
5
1
Left click
2
Right click
3
Middle click
4
Forward
5 Backward
6 Setting
7
Scroll up
Instruction
MODEL:M4W-RGB

Mouse instruction:

1.Take out the wireless USB Nano receiver from package
2.Plug the receiver into your computer USB port
3.Turn on the mouse power by switching the power switch on the bottom of the mouse
4.Waiting for computer installation finished

DPI setting and indication:

1.DPI level: 400-800-1200-1600-3200-4000-7200-19000,total 6 levels DPI
2.By pressing the setting button on the top of mouse when the mode switch is in DPI
mode to change DPI circularly

Polling rate:

125(red)-500(blue)-1000Hz(green)

Mode switch and setting function:

14
7
1.Setting button is DPI change function when the mode is in DPI mode
2.Setting button is RGB setting function when the mode is in RGB mode
3 2
3.Setting button is PGDN function when the mode is in PGDN mode
8 4.Power off the mouse when the mode switch is in Power off mode
6

Wired and wireless function:

1.Wired and wireless mode switch automatically, when you plug the receiver into
9
computer without cable connection, it will work as wireless mode.
2.If you connect the cable from computer to the mouse, it will switch to wired mode
automatically and work as wired mode.

Low power and charging indication

1.Low power indication: when mouse battery power is low, the Red color will blink,
10 11
12 13
you need charge the mouse
2.During charging the yellow color led will blink, after the battery charging full,
the LED color will back to previous normal RGB effect.
8
Scroll down

Pairing

9
Profile Use pairing tool to pair the mouse and receiver if lost connection or change
to new receiver
10
Power Off
11 DPI Mode

About shape change and weight balance adjustment:

12 RGB Mode
1. Unscrew the back cover to change different shape back shell
13 2. Take out the button from end to change the button
PGDN Mode
3. Unscrew the battery screw under the mouse to move the battery forward or
14
Type-c connection
backward to adjust the mouse balance
Battery screw
Battery screw

Main Specification

Size:
Weight:
Switch
Sensor
Max DPI
Default DPI:
400-800-1200-1600-3200-4000-7200-19000DPI
IPS
Acceleration
Polling rate
Interface
Battery type
Battery capacity
Charging time
Button
CAUTION
Back shell
Back shell 1.Keep the battery dry.
2.Avoid locating the battery terminals near metallic object.
3.Do not short-circuits and avoid metallic or water come into mouse to cause battery short
4.Use computer USB and specified cable to charge the mouse
1 21.8x68x39.8mm
Around 71g
Kailh GM8.0
PAW3370
19000
400ips
50g(Max)
125-500-1000Hz
USB 2.0
Li-ion Polymer Battery
500mAh
Around 2h