Table of Contents
Advertisement
en Before using for the first time
Basket heights
Set the baskets at the right height.
Appliance height 81.5 cm with cutlery drawer
Level
1 max. ø
2 max. ø
3 max. ø
Before using for the first time
Before using for the
first time
Before using for the first time
Performing the initial config-
uration
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Requirement: "The appliance has
been installed and connected."
→ Page 11
"Add special salt." → Page 23
1.
"Add rinse aid." → Page 25
2.
"Switch on the appliance."
3.
→ Page 30
"Setting the water softening sys-
4.
tem." → Page 23
"Set the amount of rinse aid to be
5.
dispensed." → Page 25
"Add detergent" → Page 26.
6.
Overview of water hardness settings
You can find an overview of the water hardness values that can be selected
here.
You can find out how hard your water is from your local water company or by
using a water hardness tester.
Water hardness °E
0 - 8
22
Top basket
16 cm
18.5 cm
21 cm
Hardness range
Soft
Bottom basket
30 cm/"31 cm" → Page 20
27.5 cm
25 cm
Start the Programme with the
7.
highest cleaning temperature
without tableware.
To remove any marks from water
or other residues, we recommend
you operate the appliance without
tableware before using it for the
first time.
Tip: You can change these settings
and other "Basic settings"
→ Page 33 at any time.
Water softening system
Water softening system
Hard water leaves limescale on the
Water softening system
tableware as well as the washing
tank and parts of the appliance may
become blocked.
To ensure good dishwashing results,
you can treat the water with special
salt and the water softening system.
To avoid damage to the appliance,
water with a hardness above 9 °E
must be softened.
mmol/l
0 - 1.1
Setting value
H00
Advertisement
Table of Contents
