Advertisement
TK-868HG
Adjustment Location /
Switch /
LED
Volume
Power
up/down
MIC jack
Programmable function keys
Note
Flash memory
The firmware program (User mode, Test mode, Tuning
mode, etc.) and the data programmed by the FPU (KPG-56D)
for the flash memory, is stored in memory. When parts are
changed, program the data again.
EEPROM
The tuning data (Deviation, Squelch, etc.) for the EEPROM,
is stored in memory. When parts are changed, readjust the
transceiver.
32
ADJUSTMENT /
Channel
Display
up/down
Adjustment Point /
TX-RX UNIT (A/2)
L22
TC106
PLL/VCO
CV
L13
L5
TC109
Repair Jig
Chassis
Use jig (Part No. : A10-4010-02) for repairing the TK-868HG.
The jig facilitates the voltage check when the voltage on the
component side TX-RX unit is checked during repairs.
Extension cable
Part No. : E30-3404-05
Extension cable
RSSI
Ax4
Bx2
Ax5
Ax2
A
2.6 x 6
B M3 x 8
Advertisement
