Subscribe to Our Youtube Channel
Related Manuals for ClearSpan EZ-Grow Greenhouse
Summary of Contents for ClearSpan EZ-Grow Greenhouse
- Page 1 CLEARSPAN EZ-GROW GREENHOUSES ™ ClearSpan ™ EZ-Grow Greenhouse Photo may show a different but similar model. ©2008 ClearSpan™ All Rights Reserved. Reproduction is prohibited without permission. STK# DIMENSIONS 103474 10' W x 10' L Revision date: 09.12.08...
-
Page 2: Safety Precautions
• Never erect the structure under power lines. • Identify whether underground cables and pipes are Thank you for purchasing this ClearSpan™ shelter. When present before preparing the site or anchoring the properly assembled and maintained, this product will structure. -
Page 3: Assembly Procedure
These words and phrases are common to most ClearSpan™ shelters and identify the different parts of the shelter. (Some are used in this document. Others may not apply to this particular shelter.) These terms describe the shipped parts and can also be found on the materials list/spec sheets included with the shipment. -
Page 4: Required Tools
CLEARSPAN EZ-GROW GREENHOUSES ™ REQUIRED TOOLS The following list identifies the main tools needed to Space below is reserved for customer notes. assemble the shelter. Additional tools and supports may be needed depending on the structure, location, and application. •... - Page 5 CLEARSPAN EZ-GROW GREENHOUSES ™ The following graphics and photos will help you identify the different parts and show you how they are used. (Not all parts are shown.) QH1061 CC6212 FA4470B Fabric Clip Ratchet Tek Screw Unswaged Swaged 103620b 102191...
- Page 6 CLEARSPAN EZ-GROW GREENHOUSES ™ ADDITIONAL PARTS IDENTIFICATION NOTES In some instances, there can be differences between the parts that are shown and referenced in the instructions and the parts that are shipped with the shelter. These differences do not affect the integrity of the shelter, but can change the assembly procedures.
- Page 7 CLEARSPAN EZ-GROW GREENHOUSES ™ ClearSpan ™ EZ-Grow Greenhouse OVERVIEW This section is an overview of the process for assembling your canopy. The illustration below helps identify the main parts of the canopy. 1. Locate the required parts for each assembly procedure.
-
Page 8: Frame Assembly
CLEARSPAN EZ-GROW GREENHOUSES ™ LAY OUT THE BUILDING SITE FRAME ASSEMBLY After the site is prepared, identify the location of the shelter There are different ways to assemble this shelter. This corners to help square the frame after it is assembled. - Page 9 CLEARSPAN EZ-GROW GREENHOUSES ™ FRAME ASSEMBLY (CONTINUED) Rafter Leg Installation Procedure 3. Attach the rafter pipes as shown in the drawing. Rafter 1. While lifting one side of the assembled roof structure, pipes are 68". Position the eye bolts of the couplers to insert a 68″...
- Page 10 CLEARSPAN EZ-GROW GREENHOUSES ™ 3. Position the conduit and panel between the legs of END CONDUIT ASSEMBLIES the end rafter and attach the conduit to each corner Gather the parts: coupler. • Pipe 1.315" x 27" plain (#131P027) NOTE: The end panel material will need trimmed.
- Page 11 CLEARSPAN EZ-GROW GREENHOUSES ™ SQUARE THE ASSEMBLED FRAME ANCHOR THE SHELTER Gather the parts: At this point, anchor the shelter. Consult the MUST READ document for anchoring information and suggestions. • Measuring tape Please call customer service at 1-800-245-9881 for additional anchoring information.
- Page 12 CLEARSPAN EZ-GROW GREENHOUSES ™ ATTACH END PANEL ASSEMBLIES PREPARE MAIN COVER Gather the parts: Gather the parts: • Fabric clips - #CC6212 (Divide quantity in half.) • Pipe 1.315" x 68" plain (#131P068) • Tek screws, measuring tape, and scissors or utility knife •...
- Page 13 CLEARSPAN EZ-GROW GREENHOUSES ™ PREPARE MAIN COVER (CONTINUED) ATTACH MAIN COVER Gather the parts: 2. Assemble two main cover conduits. Each conduit assembly consists of one (1) 52" swaged pipe and one • Main cover (with conduits inserted) (1) 68" plain pipe with Tek screw used to secure the •...
- Page 14 CLEARSPAN EZ-GROW GREENHOUSES ™ ATTACH MAIN COVER (CONTINUED) 7. Lift the cover skirt (if present) and cut a slit in the cover conduit pocket at the ratchet position. 4. Once the main cover is pulled into position, center the 8. Insert a 3' section of strap through the slit and around cover on the frame and remove the ropes.
- Page 15 If the shelter is moved, inspect all parts and connections before reassembling. • For replacement or missing parts, call 1-800-245-9881 for assistance. NOTE: With the exception of Truss Arch buildings, ClearSpan™ shelters and shelters do not have any tested loading criteria. Revision date: 09.12.08...
- Page 16 CLEARSPAN EZ-GROW GREENHOUSES ™ QUICK START GUIDE 10' Wide EZ-Grow Greenhouse F F R R O O N N T T Grid Represents 12" Squares Revision date: 09.12.08...
- Page 17 CLEARSPAN EZ-GROW GREENHOUSES ™ Revision date: 09.12.08...
- Page 18 CLEARSPAN EZ-GROW GREENHOUSES ™ Revision date: 09.12.08...
- Page 19 CLEARSPAN EZ-GROW GREENHOUSES ™ Revision date: 09.12.08...
- Page 20 CLEARSPAN EZ-GROW GREENHOUSES ™ Revision date: 09.12.08...
- Page 21 CLEARSPAN EZ-GROW GREENHOUSES ™ Space below is reserved for customer notes. Revision date: 09.12.08...
Need help?
Do you have a question about the EZ-Grow Greenhouse and is the answer not in the manual?
Questions and answers