IDX UC-PD2 Instruction Manual

UC-PD2
2ch USB Power Delivery Charger
Instruction Manual
Thank you for purchasing the UC-PD2. This UC-PD2 is the charger which supports USB PD (Power Delivery)
function. We strongly recommend reading this Instruction Manual on how to best use the UC-PD2 . Please keep
this manual for your reference. If you have any additional questions, please contact your local IDX office listed
at the end of this manual.
Do not connect to an AC power source that exceeds the voltage
●
specification stated on the unit.
Use only with the compatible batteries listed in this manual.
●
Do not short the contact pins with any metal object.
●
Do not carry or store with metal equipment.
●
Do not immerse in water.
●
Do not attempt to open the outer casing or break apart.
●
Do not subject the unit to extreme physical impact or pressure, or
●
place any object across the terminals that could cause it to short.
Do not attempt to use if damaged.
●
Protect the power cord from any damage.
●
Please don't use the charger which has damages on the cable
●
and connector is deformed.
Features
IDX Lithium-ion batteries equipped with USB PD can be charged.
●
Equipped with two USB-C ports, supporting USB PD standards up to
●
100W single port and up to 65W dual port.The output voltage is
automatically switched by connecting the battery.The maximum output
when charging the battery depends on the USB PD input
specifications on the battery side.
Equipped with two USB-A ports, it can supply up to 18W single port
●
and up to 10W dual port at the same time.It can be used for portable
devices powered by USB
AC plug can be folded and stored.
●
POWER LED lights when connecting the AC plug to the outlet.
●
Operating Instructions
1. Connect the AC plug to the outlet.
Waring : Use in a flat surface only.
* The shape of the AC plugs varies by region
2. Connect the supplied USB Type-C cable
into the USB-C port on the charger and
the USB-C port on the IDX battery to start charging.
Confirm the IDX battery LED indicator is lit up when charging.
3. Remove the connector after charging.
Use the approved power cord / appliance connector / plug
●
conforming to the proper ratings (voltage, ampere) and safety
regulations of each country if applicable.
Keep the unit away form excessively dry hot or humid environments.
●
Stop charging immediately if the charging does not complete
●
within the designated time.
In case of abnormal smell , leak , color change or case deformity
●
during use, turn the power off and unplug the cable from the socket
to avoid possible injury .
Do not carry the charger while the battery is attached.
●
Do not charge the battery while the battery is used with equipments.
●
Do not charge the battery while the battery is charged from
●
other charger.
Specifications
Recommended batteries : IDX V-Mount Lithium Ion batteries equipped with USB PD
●
Input voltage ： AC100V〜240V 50 / 60Hz Automatic
●
Output voltage ：
●
USB-C port ： DC5V/3A、 DC9V/3A、 DC12V/3A、 DC15V/3A、 DC20V/5A （MAX100W）
USB-A port ： Single port ： DC5V/3A、 DC9V/2A、 DC12V/1.5A
Dual port ： DC5V/2A + DC5V/2A
DC Connector : USB Type-C 2port / USB Type-A 2port
●
Operating temperature ： 0 〜 25˚C / 32 〜 77˚F
●
Operating humidity ： 5％ 〜 80％ RH
●
Protection circuit : Over-voltage, Over-current, Short circuit
●
Dimensions ： approx. 69 ( W ) × 87 ( H ) × 32 ( D )mm
●
approx. 2.71 ( W ) × 3.42 ( H ) × 1.26 ( D ) inches
The attached USB Type-C cable 5A length : approx. 1.5m
Weight : approx. 290g / 0.64lbs
●
Charge time standard ： For the latest charging time information, please visit our website
●
( https://idxtek.com/pages/charging-times )
Location and Function of Parts
①
③
④
U C
②
① Body
② Power LED
③ USB-A connector ×2
④ USB-C connector ×2
⑤ AC plug
approx. 59inches
for US
●
⑤
2
- P D
for EU
●
D 2
U C -P
* The shape of the AC plugs varies by region
2
- P D
U C
for UK
●
D 2
U C -P