Page 1
User Manual ACCUR8 Classic Weather Station AWS200...
Page 2
(www.metoffice.gov.uk). ACCUR8 products are tested for operation and functionality but have not been independently tested by a UKAS accredited laboratory. As part of our ongoing policy to improve the design and specification of our products, we reserve the right to change any detail given without prior notice.
® Thank you for purchasing the ACCUR8 Classic Weather Station AWS200. General Safety Instructions Risk of electric shock This device has electronic parts operated via a power source (power supply and/or batteries). Improper use of this product can cause an electric shock. An electric shock can cause serious or potentially fatal injuries. The following safety information must be observed at all times: •...
Installation Instructions The weather station consists of a display unit, a combined wind and temperature sensor connected by a six- core cable; a rain sensor (available separately connected by a four-core cable (only three cores used)) and a separate junction box & power supply. Sensor wiring The cables are connected to the individual sensors via the terminal block on the sensor bracket.
Page 7
Operation Instructions LCD Display operating instructions The LCD Display can be operated via the four end panel buttons and the three-rear panel “dip” switches. The LCD display has three main modes of operation which are: Clock, Temperature, and Rainfall (supplied separately) Clock The clock forms part of the displays “scroll”...
Page 8
Resetting the rainfall counters is accomplished by holding button “B” while on the rainfall screen. Hold for 5 seconds to clear the current reading. Hold for 10 seconds to clear both current and accumulated readings.
Troubleshooting Guide If you've installed your Weather Station and find that despite careful attention to detail, it does not work as expected. The following notes may assist in getting your Weather Station to work. Nothing appears to work. Check that the power supply is turned on at the wall socket. Check power cable correctly plugged into the Junction Box.
Phone: 01243 558 280 EC Declaration of Conformity Tempcon Instrumentation Limited declares that the equipment type with item number A8-AWS200 complies with EMC Directive 204/108/EC. The full text of the declaration of conformity is available on request from the address above.