Brother P-touch PT-D410 Manual page 6

Print Labels (cont.)
Numbering Set this feature when printing consecutive
Print alphanumeric characters to add a serialised
+
number to each label.
Enter alphanumeric characters
[Numbering]
Set the start position
Set the end position
Select a print quantity
Mirror Print reversed from left to right.
Print Print on clear tape and attach it to the inside
+
of glass to create a label that can be read
from the outside.
Enter text +
/
Barcode Create a barcode and print it.
Printing
[Barcode Setup]
[Protocol]
[Width]
[Under#] [On] / [Off]
Enter barcode data
[Print] Select a print quantity
/
Other
Tape Feed approx. 23 mm of tape to remove
Feed any slack.
+
+
Save Save your labels and access them later to
edit and print them, as well as overwrite
and save edited data.
Maximum number of saved labels: 50 files
Maximum character count per file:
280 characters
Create a label
/
destination /
Reset Reset the internal memory, for example,
to reset the Label Printer or delete any
+
saved label data.
+ Turn off the machine.
Press and hold down
holding down
and then release
For more information about using your Label Printer,
see the User's Guide on the Brother support website at
support.brother.com.
Symbols and Frames
Symbol Examples
+
/
/
/
/ /
Auto Format Layouts Examples
[Mirror]
For more information about symbols and frames, see the User's Guide on the Brother support website at support.brother.com.
/ /
Set Margins
/
By default the printer creates a margin of approx. 23 mm at the beginning of each label. To reduce this margin, print multiple labels
Select a Protocol
continuously.
[Small] / [Large]
You can also change the margin before and after the text for the second and subsequent labels when printing multiple labels.
/ Select [Chain] to print labels with the narrowest margin width. DO NOT feed the tape until the final label is printed. When the final
label prints, feed the tape, and press the Tape Cutter Lever.
/
/
: Print area
ABC
: Margin
: Laminate margin
Large Margin
2 mm
ABC
Approx.
23 mm
[Save]
Select a save
Chain
2 mm
and . While
Approx. 23 mm
and , press once
and .
...
Small Margin
When the label length is approx. 23 mm
or more
2 mm
ABC
Approx. Approx. Approx. Approx. 23 mm
25 mm 23 mm 25 mm
No Cut
2 mm Cut Position
ABC ABC
2 mm Approx. 23 mm
Frame Examples
Accented Character Examples
...
Small Margin
When the label length is approx. 23 mm
or less
2 mm 2 mm 2 mm
ABC ABC
2 mm Approx. 23 mm 2 mm
Special Tape
2 mm 2 mm
ABC ABC
2 mm Approx. 23 mm
...
...
2 mm
ABC ABC
Approx. 23 mm
2 mm 2 mm 2 mm
ABC ABC
2 mm