Limitation of liability In no case shall Cambricon be liable for any damage caused by the use or inability to use this Guide (including but not limited to damage such as loss of profits, business disruption and loss of information), even if Cambricon has been advised that such damage may be suffered.
Cambricon. Except for the customer's right to use this guide information and products, according to this guide, Cambricon does not grant any other express or implied rights or permits.
Cambricon ® 2. Overview MLU-X1001 accelerator is a construction unit of artificial intelligence supercomputing. The extender inherits 4 MLU290-M5 intelligent accelerating cards, and provides up to 2 POPs of adaptive precision computing power. The supercomputing system from 4 cards to 16 cards is constructed by using the Cambrian MLU-LINK inter chip direct connection technology, which provides a highly agile, highly reliable and high-performance computing foundation for the Artificial Intelligence Computing Center.
8*100 GB /S TDP power consumption 2300W Heat dissipation scheme Air-cooled, compatible with liquid-cooled 3.2 Overview of structural specifications The structure specifications of the MLU-X1001 accelerator are as follows: Table 3.2 Structural Specification for MLU-X1001 Specification indicators Note Shape 437mm*87mm*735mm...
78.5 mm 26 AWG 121.64 mm 102.7 mm Figure 3.1 Bending radius of cable 3.3 Overview of electrical specifications MLU-X1001 accelerator electrical specifications as follows: Table 3.4 Electrical Specification for MLU-X1001 Specification indicators Note System interface PCIE Gen 4X 16...
AC 115-127V,14,2A, 60/50Hz Input voltage AC 200-240V,14.9A, 60/50Hz DC 240V, 16A(China mainland only) 3.4 Summary of heat dissipation specifications The heat dissipation specification of MLU-X1001 accelerator is as follows: Table 3.4 Heat dissipation specifications of MLU-X1001 Specification indicators Note Working temperature 0℃-35℃, altitude of 900m below...
4.2 MLUX -PA4 MLUX -PA4 is a PCIE board, which is placed on the host server and provides Mini SAS HD interface for connection with MLU-X1001.The details are shown in the following figure: Figure 4.2 MLUX -PA4 graphic Table 4.2 MLUX -PA4 Description...
Cambricon ® 5. Electrical specifications 5.1 PCIE topology description MLU-X1001 accelerator uses 2 miniSAS HD interfaces to connect with the host server, and there are 2 PCIE switching chips to connect the PCIE devices inside.PCIE interconnection topology is shown as follows: Figure 5.1 PCIE Connection topology...
4.7 KΩ pull-up to 3.3 V 5.2 MLU-LINK interface description MLU-X1001 accelerator is equipped with 4 MLU290-M5 intelligent accelerating cards, each card has 6 MLU-LINK ports. Among them, 4 ports are used for internal interconnection and 2 ports are used for external interconnection.
AC 200-240V,60/50Hz 14.9A DC 240V (China mainland only) MLU-X1001 accelerator is able to reduce power consumption adjustment for instantaneous power changes above the µs level. The power regulator can support power fluctuations within the ms level (e.g .1.2 x TDP).
Cambricon ® 6. BMC management system The BMC management system of MLU-X1001 is compatible with server management standards IPMI 2.0, with high reliability of hardware monitoring and management functions. 6.1 BMC function description MLU-X1001 accelerator BMC management system main functions and features as follows: Table 6.1 BMC Functional description...
MLU-X1001 can provide up to 360 CFM of air volume Do not block the front and rear ventilation areas of the chassis during operation of MLU-X1001 When installing MLU-X1001, please reduce the air resistance around the inlet and outlet of the ...
Cambricon ® 7.2 Wind resistance curve of MLU-X1001 The system wind resistance curve of MLU-X1001 is shown below: Figure 7.1 Wind resistance curve of MLU-X1001 Table 7.2 Air Volume VS Pressure Drop of MLU-X1001 Air volume (CFM) Air pressure (Pa)
2366016-4 1 m, 30 AWG 2366101-3 2 m, 28 AWG 8.3 Network MLU-X1001 can use InfiniBand network card or ROCE network card for cluster interconnection. Compatible network card models are as follows: Table 8.3 Network Card Compatibility Manufacturers Model Specifications...
Cambricon ® 9. Cambricon NeuWare development environment NeuWare fully supports various mainstream programming frameworks (e.g. TensorFlow 、Caffe 、 PyTorch and MXNet). For the above programming framework, users can easily develop and deploy deep learning applications on Cambrian MLU290-M5. At the same time, the NeuWare provides a complete runtime system and driver software to facilitate the rapid integration of the system.
Cambricon ® 10. Compliance MLU-X1001 accelerator is compliant with the regulations listed in this chapter. The compliance marks can be found on the labels of each devices. FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.