Reinstalling/Using Washer Again - Whirlpool 7MWTW7120LC Use & Care Manual

WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.

REINSTALLING/USING WASHER AGAIN

To reinstall washer after non-use, vacation, winter storage,
or moving:
1. Refer to "Installation & Care Instructions Manual" to
locate, level, and connect washer.
2. Before using again, run washer through the following
recommended procedure:
To use washer again:
1. Flush water pipes and hoses. Reconnect water inlet
hoses. Turn on both water faucets.
2. Plug in washer or reconnect power.
3. Run washer through VOLUMINOSA (Bulky Items)
cycle to clean washer and remove antifreeze, if used.
Use only HE (High Efficiency) detergent. Use ½ the
manufacturer's recommended amount for a medium-
size load.
21