Two-Year Limited Warranty; Maintenance - Craftsman CMESTA900 Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

English

CAUTION:
use the appropriate type of cutting line.
Figure T

MAINTENANCE


WARNING:
injury, unplug the appliance before performing
any maintenance.
Keep the air intake slots clean to avoid overheating.
Your trimmer line can dry out over time. To keep your line
in top condition, store spare pre-wound spools or bulk line
in a plastic, sealable bag with a tablespoon of water.
Plastic parts may be cleaned by using a mild soap and a
damp rag.
The line cutter on the edge of the guard can dull over
time. It is recommended you periodically touch-up the
sharpness of the blade with a file.
iMPORTAnT: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment should be performed
by qualified service organizations, always using identical
replacement parts..
Automatic line feed does not work
Unplug the trimmer.
Remove the spool cap.
Make sure you are using 0.065 inch (1.65 mm) diameter
ROUND line.
Check to see if the lever is in place and pivots freely.
Pull the cutting line until it protrudes approximately
5-3/8 inches (136 mm) from the spool. If insufficient
cutting line is left on the spool, install a new spool of
cutting line.
Ensure that the line is not crisscrossed on the spool as
detailed in Figure T. If it is, unwind the cutting line, then wind
it back on the spool neatly so that the lines do not cross.
Ensure the beginning of the cutting line is pulled tight
against the spool as shown in Figure S.
Align the tabs on the spool cap with the cut outs in
the housing.
Push the spool cap onto the housing until it snaps securely
into place.
If the cutting line protrudes beyond the trimming blade,
cut it off so that it just reaches the blade. If the automatic
line feed still does not work or the spool is jammed, try the
following suggestions:
8
Before you begin trimming, only
To avoid serious
-
Carefully clean the spool and housing.
-
Remove the spool and check if the lever in the spool
housing can move freely.
-
Remove the spool and unwind the cutting line, then wind
it on neatly again. Replace the spool into the housing.

TWO-YEAR LIMITED WARRANTY

Craftsman (U.S.) Inc. warranties this product to be free
from defects in material or workmanship for a period of
two (2) years following the date of purchase, provided that
the product is used in a home environment. This limited
warranty does not cover failures due to abuse, accidental
damage or when repairs have been made or attempted
by anyone other than qualified service organizations. A
defective product meeting the warranty conditions set forth
herein will be replaced or repaired at no charge:
Return the product to the retailer from whom it was
purchased (provided that the store is a participating
retailer).Returns should be made within the time period of
the retailer's policy for exchanges. Proof of purchase may be
required. Please check with the retailer for its specific return
policy regarding time limits for returns or exchanges.
This warranty does not apply to accessories. This warranty
gives you specific legal rights and you may have other rights
which vary from state to state. This product is not intended
for commercial use, and accordingly, such commercial use
of this product will void this warranty. All other guarantees,
express or implied, are hereby disclaimed.
LATIN AMERICA: This warranty does not apply to
products sold in Latin America. For products sold in Latin
America, check country specific warranty information
contained in the packaging, call the local company or see
the website for such information.
Imported by
Craftsman,
701 East Joppa Rd.
Towson, MD 21286 U.S.A.
Accessories

WARNING:
those offered by Craftsman, have not been tested with
this product, use of such accessories with this tool
could be hazardous. To reduce the risk of injury, only
Craftsman recommended accessories should be used
with this product.
Recommended accessories for use with your tool are
available from your local dealer or authorized service center.
If you need assistance regarding accessories, please call:
888-331-4569.
Since accessories, other than

Advertisement

Table of Contents
loading

Table of Contents