Door Removal; Door Glass Removal; Water Collector Cleaning - Samsung BQ2Q Series User Manual

DOOR REMOvAL

For normal use, the oven door must not be removed but if removal is necessary, for
example, for cleaning purposes, follow these instructions.
CAUTION: The oven door is heavy.
1. Open the door
and flip open
the clips at
both hinges
completely.

DOOR GLASS REMOvAL

The oven door is equipped with 3 sheets of glass placed against each other. These
sheets can be removed for cleaning.
WARNING: The oven door must be removed from the oven for cleaning the door
glasses.
1. Remove 2
screws on the
left and right
sides of the
door.
The quantity of door glass is different from 3 EA to 4 EA model by model.
Important: When assembly the inner glass 1, make sure not to use glass 2 and

WATER COLLECTOR CLEANING

The water collector is for collecting the water from the
moisture when oven is operating with very moist food. Food
waste can be stack on the water collector. If the cleaning is
not performed, the built-in furniture can be damaged. Clean
the water collector to protect your furniture after cooking.
WARNING: If you encounter a water leakage from the
water collector after the cooking, please contact us at
the service center.
BQ2Q7G214- BOL-DG68-00447J-01_EN.indb 45
2
70
1
2. Close the door by
approximately 70 °. With
both hands, grasp the
sides of the oven door at its
middle and pull-lift until the
hinges can be taken out.
Glass 1
2 Guide
rubbers
2. Detach the cover
and remove glass
1, 2 and 2 guide
rubbers from the
door.
put printing to direction below.
3. After cleaning, for
attaching the door
repeat the 1 and 2
steps in revers order.
The clip on the hinge
should be closed on
both side.
Cover
Guide rubbers (Right and Left)
Glass 2
Glass 1
3. After cleaning the door glasses,
for assembly repeat 1, 2 steps
in revers order. Check the right
locations of glasses with above
picture.
Water collector
cleaning and care _45
7/5/2013 11:36:09 AM