LevelOne WAP-6117 Quick Installation Manual page 3

Figure 3
LEDs Full Name
Power
Power
USB USB Light
System
System
Port Description
The WAN port is used to connect to network devices, such
WAN
as a switch
The LAN port is used to connect to network devices, such
LAN
as a switch or PC
With the AP powered on, press the Reset button for 10
seconds until the USB LED blink with green light and
Reset
System LED on without blink. The AP will restart itself
and reset the device to factory default settings.
USB To connect with USB storage device
Power To power the device by DC
Description
On The Device is powered
Light
Off The Device is not powered
On USB is connected
On system is working
Light
-3-