Compaq Evo T20 Troubleshooting Manual page 51

NetXFer Download Utility
2. Configuring the Host Computer:
Use the following settings to configure the Network Adapter
card:
❏
❏
❏
3. Installing Software on the Host Computer:
Download Softpaq SP#22499 (or the latest version) from the
www.compaq.com/support/thinclients
computer. Create a directory on the hard drive with the name
"NETXFER" and copy the following files (from the Softpaq)
into this directory.
❏
❏
❏
❏
❏
❏
❏
4. Loading the T20 or T30 Firmware Image on the host
computer:
Copy the new firmware image (*.BIN) into the NetXFer
directory. In order to work properly, the binary image that is
to be downloaded to the Compaq T20 or T30 must be named
"bootp.bin." Use Microsoft Windows Explorer or a DOS
command to change the name of the firmware image file in
the NetXFer directory to "bootp.bin."
C–2
IP Address:10.0.0.1
Subnet Mask:255.255.255.0
Gateway:N/A
Bootpmap
Btptab
Img2utc
Mkutc
Netxfer18
TFTP
ulc_code.pk
Web site to the host
Troubleshooting Guide