Description Of Remote Control; Bluetooth Mode - NGS SUBWAY User Manual

ENGLISH
DESCRIPTION OF REMOTE
CONTROL
1 On / Off
2 Audio source switch
3 Play/Pause
4 Previous track
5 Increase volume
6 Next track
7 Decrease volume
8 Music sound effect
9 News sound effect
10 Movie sound effect
11 Mute
12 Normal sound effect
1 2
3 5
4 6
7
8 10
11
9 12

BLUETOOTH MODE

• Turn on the speaker and then switch to Bluetooth mode: the
"Bluetooth mode" prompt tone will sound and the indicator
will flash in blue. Keep the speaker and Bluetooth-enabled
device within a radius of ten metres.
• Set your mobile phone to search for Bluetooth devices.
• When the Bluetooth enabled finds the speaker, select "NGS
SUBWAY" from the list of found devices.
• If required, enter the password "0000".
• After successfully being paired, BT will light up in blue.
AUX MODE
• Keep the unit powered on. Plug one end of the 3.5mm AUX
cord to the headphone jack on your device.
• Plug the other end of the 3.5mm AUX cord into the AUX jack
on the speaker.
• Use the connected device's audio controls for music playback.
3