Philips sonicare AirFloss Faq page 3

Hide thumbs Also See for sonicare AirFloss:

How do I use my Philips Sonicare AirFloss?

Our Philips Sonicare AirFloss uses compressed air to accelerate micro-droplets of water (or

mouthwash) between teeth. To use our AirFloss, follow the instructions below.

Using Philips Sonicare AirFloss

To use our AirFloss, follow our step-by-step instructions:

1. Turn on your AirFloss by pressing the power button

2. Place the nozzle tip between your two teeth at the gum line. Slightly close your lips over

the nozzle to avoid any splashing

3. Press the activation button to deliver 1-3 bursts of air and micro-droplets of

water/mouthwash between the teeth

4. Slide the nozzle tip along the gum line until you feel it settle between the next two teeth

5. Continue this process for all spaces between your teeth, including behind your back teeth

6. Turn off your AirFloss once done

Note: Your AirFloss will automatically turn off if it has not been used for one minute.

AirFloss burst modes

You can change the burst modes to have the desired amounts each time you press the activation

button. To change the modes, press the power button continuously until you reach your desired

mode. The LEDs show the selected mode:

•

Single burst: 1 LED

•

Double burst: 2 LEDs

•

Triple burst: 3 LEDs