Our Generation Let it Roll! Bowling Alley Instructions

Download this manual

BATTERIES & FUNCTION FOR

BILLBOARD SIGN:

Insert the billboard sign to wall B.

WALL B

BOWLING ALLEY FUNCTIONS:

STEP 1: Push the switch to elevate the bowling pins.

STEP 1

Let it Roll! Bowling Alley

Instructions

Open the battery cover with a screw driver.

Install 3 x AA (1.5V) batteries and follow the polarity.

(Batteries included)

TRY ME BUTTON

STEP 2: Pull the lever to raise platform so

the bowling pins can fall down.

PINS WILL ELAVATE

For "TRY ME" mode:

Switch to "Off" position and press try me button.

For "NORMAL" mode:

Press "On" button to activate the light.

Press "Off" button to turn off.

Open

STEP 2

PINS WILL FALL

PLATFORM

WILL RAISE

BD67039

Need help?

Do you have a question about the Let it Roll! Bowling Alley and is the answer not in the manual?

Page 1 Let it Roll! Bowling Alley Instructions For “TRY ME” mode: BATTERIES & FUNCTION FOR Switch to “Off” position and press try me button. Open the battery cover with a screw driver. BILLBOARD SIGN: Install 3 x AA (1.5V) batteries and follow the polarity.
Page 2 This device complies with Part 15 of the FCC Rules. Operation is BATTERIES & FUNCTION FOR subject to the following two conditions: (1) this device may not cause MUSIC & PROJECTOR LIGHTS: harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Bd67039