Philips TT2039 Manual page 21

Start with the highest setting (5) to acquire practice with this appliance.
Hair length setting
1
2
3
4
5
1 Hold the appliance in the trimming position, with the trimming unit
pointing upwards and the shaving unit pointing downwards (Fig. 7).
2 Press the hair length setting selector (1) and then move it up or
down (2) to select a setting (Fig. 8).
- The two lines next to the setting selector show which setting you
have selected (Fig. 9).
3 Press the trimming unit on/off button once to switch on the
trimming unit (Fig. 10).
4 To trim the hair, move the trimming comb through the hair
slowly (Fig. 11).
Tips
- Always make sure that the tips of the trimming comb point in the
direction in which you move the appliance.
- Make sure that the flat part of the trimming comb is always fully in
contact with the skin to obtain an even result.
- Since all hair does not grow in the same direction, you need to move
the appliance in different directions (upward, downward or across).
- Trimming is easier when the skin and hair are dry.
5 When you are finished, press the trimming unit on/off button again
to switch off the trimming unit (Fig. 10).
Hair length after trimming
3mm
5mm
7mm
9mm
11mm
0
English