3.2.3 Rear Cover
Warning: Disconnect the mains internal cable(MB to IR board) before removing the rear cover.
1. Remove fixation screws [2] and [3] that secure the back cover..
2. Gently lift the rear cover from the TV. Make sure that wires and cables are not damaged while lifting the rear cover from the set.
3.2.4 Keyboard Control Unit
1.
Release the connector [1] from the SSB Board.
Caution: be careful, the Keyboard is catch on the Back cover, please be careful to avoid damage the fragile connectors!
2.
Remove all the fixation screws from the keyboard control panel [2] and take it out from the Back cover
When defective, replace the whole unit.
2