Table of Contents
Advertisement
The following HDMI connector can be used:
• HDMI 1: HDMI input ( TV digital interface support HDCP)
with digital audio/PC DVI input/ARC
• HDMI 2: HDMI input ( TV digital interface support HDCP)
with digital audio/PC DVI input
• +5V detection mechanism
• Stable clock detection mechanism
• HPD control
• Sync detection
• TMDS output control
• CEC control
• ARC control
• MHL control
6.7 Video and Audio Processing - NT72562TBG-BB
The NT72562TBG-BB is an integrated digital TV system-on-chip which compliants with variety ATV as NTSC, PAL and SECAM, and DTV standards as
ISDB-t, DV-T/-T2/-C/-S/-S2, ITU-TJ.83B, ATSC, DTMB, integrates DTV and nulti-media AV decoder, SIF demodulator, and support A/V post-processing.
• Spread Spectrum PLL for EMI reduction
• eMMC 4.51 with HS200 type flash
• Support VGA / IR / KeyPad / CEC/DDCCI wake-up
• Meet Common Interface Plus's Robust and Compliance rule
• Integrated triple high speed ADCs/ PLL to support both YPbPr and RGB format signal
• Support multi-standards, macro-vision detection and related status report
• A transport de-multiplexer
• Support VPS signal decode for EU channel sorting purpose
• Built-in 10-bit DAC for CVBS Analog Video output
• Support pixel formats in YUV420,YUV422 and YUV444
The integrated video ADC and video decoder support PC VGA port, YPbPr, SCART, CVBS and S-Video Input. Regarding the tuner input, the digital VIF
performs the universal analog TV demodulation (NTSC, PAL, and SECAM), including IF processing, AGC, video demodulation, and second sound IF
generation (SSIF).The video decoder supports universal TV video format. The integrated audio ADC supports stereo audio input corresponding to video
input sources. The integrated TV sound decoder supports universal TV sound format
The advanced picture quality and color engine create more vivid image impression than ever. The HDMI receiver v1.4a, supports deep color, CEC features
and 3D formats. The USB high speed host supports updating firmware code, multi-media playback from the external USB flash devices.
The standby controller can operate sololy from the main system, powered by the standby power source from power module, consumes as low current as
possible. It meets the requirement of Green appliance.
Advertisement
Table of Contents
