User's Manual Foreword General This manual introduces the functions and operations of the wireless door detector (hereinafter referred to as the "door detector"). Safety Instructions The following signal words might appear in the manual. Signal Words Meaning Indicates a high potential hazard which, if not avoided, will result in DANGER death or serious injury.
Page 3
User's Manual ● All designs and software are subject to change without prior written notice. Product updates might result in some differences appearing between the actual product and the manual. Please contact customer service for the latest program and supplementary documentation. ●...
User's Manual Important Safeguards and Warnings This section introduces content covering the proper handling of the Device, hazard prevention, and prevention of property damage. Read carefully before using the Device, comply with the guidelines when using it, and keep the manual safe for future reference. Operation Requirements ●...
User's Manual 1 Introduction Door detector is a wireless detector consisting of a sensor and a magnet that can send a signal to the hub and trigger an alarm when an armed door is opened. It can be set up via the DMSS app for iOS and Android phones.
User's Manual 3 Design 3.1 Appearance Figure 3-1 Appearance Table 3-1 Structure Name Description ● Flashes green quickly: Pairing mode. Indicator ● Solid green: Alarm event is triggered. Peripheral port Connect the peripheral with the alarm cable. On/Off button Turn on or turn off the door detector. When the tamper button is released, the tamper alarm will Tamper button be triggered.
User's Manual 4 Connecting to the Hub Prior to connection with the hub, install the DMSS app on your phone. Make sure that you have installed the latest version of the app. This manual uses iOS as an example. ● Make sure that you have already created an account, and added hub to the DMSS. ●...
User's Manual 5 Installation Prior to installation, connect the door detector to the hub and check the signal level at the installation location. We recommend installing the door detector in a place with the signal strength of at least 2 bars. ●...
User's Manual 6 Door Detector Configuration You can view and edit general information of the door detector. 6.1 Configuring the Door Detector On the Hub interface, select the door detector from the accessory list, and then you can configure the parameters of the door detector. Table 6-1 Door detector parameter description Parameter Description...
User's Manual Parameter Description ● Select from high, low, and automatic. Transmit Power ● The higher the transmission power, the farther the transmission and the higher power consumption. Cloud Update Update online. Delete the online accessory. Delete Go to the Hub interface, select the accessory from the list, and then swipe left to delete it.
Page 14
User's Manual Parameter Value Active status of the 24 h protection zone. 24 H Protection Zone ● : Enabled. Status ● : Disabled. Program Version The program version of the door detector.
Need help?
Do you have a question about the ARD323-W2 and is the answer not in the manual?
Questions and answers