Advertisement
(3) Hard Drive Assembly (cont.)
c) Screw the hard drive into the chassis using the mounting holes
on the side.
(3) Hard Drive Assembly (cont.)
d) Flip over the chassis and tighten screws into the aligned holes.
Mount holes for
3.5-inch HDD
Mount holes for
2.5-inch HDD
e) Slide the bracket back into the housing. A x the bottom screws.
(4) Hard Drive Formatting
If you have installed a new drive, you must rst format the drive
before it is accessible. Use Disk Management in Windows or
Disk Utility in Mac to format the drive.
Instructions: www.oyendigital.com/format
HDX Pro C Enclosure
Installation Guide
Advertisement
Table of Contents
Related Manuals for OYEN DIGITAL HDX Pro C
Summary of Contents for OYEN DIGITAL HDX Pro C
- Page 1 (4) Hard Drive Formatting If you have installed a new drive, you must rst format the drive before it is accessible. Use Disk Management in Windows or HDX Pro C Enclosure Disk Utility in Mac to format the drive. Installation Guide...
- Page 2 (3) Connecting the MiniPro a) Remove the 4 screws from the bottom of the housing. Slide out the inner bracket. Item name: HDX Pro C b) Slide the hard drive onto the SATA connector at a slight angle. Supports: 3.5 inch HDD SATA...
Need help?
Do you have a question about the HDX Pro C and is the answer not in the manual?
Questions and answers