Advertisement
STEP 2
#17 Φ10 4pcs
#23 M10 2pcs
#33 M10X25 2pcs
#34 M10x90 2pcs
1. Slide 12x weights (#60) into the guide rods (#3) in order.
(Important: Ensure the larger arch is facing upwards and the smaller arch is facing down.)
Insert the shaft lever (#61) into the middle hole, then place the counter weight (#62) on top.
2. Select a choice piece (#60) with L pin (#89).
3. Connect frame piece (#4) to the upper guide rods (#3).
a. Use 2x pan head screws M10x25mm (#33), 2x Φ10 gaskets (#17).
4. Connect vertical beam (#5) and plate (#25) to frame piece (#4).
a. Use 2x screw carriage M10x90mm (#34), 2x Φ10 washers (#17) and 2x lock-nut M10mm (#23).
12
| ASSEMBLY INSTRUCTIONS
34
33
34
17
25
4
17
17
23
23
5
89
33
17
3
61
62
60
Advertisement
