Advertisement
IV. ASSEMBLY INSTRUCTIONS
ATTENTION:
It is strongly recommended that this machine is assembled by 2 or more adults to avoid injury.
STEP 1
23
17
1
1. Slide the 2x cushions (#59) onto the guide rods (#3).
2. Insert the guide rods (#3) into the 2x holes on ground piece (#2).
a. Use 2x pan head screws M10x25mm (#33) and 2x Φ10 washers (#17) to attach the guide rod (#3) to
ground piece (#2).
3. Connect ground piece (#32) and ground piece (#2) to ground piece (#1).
a. Use 2x screw carriage M10x90mm (#34), 2x Φ10 washers (#17) and 2x M10mm lock-nut (#23).
4. Connect the vertical beam (5#) and fixed plate (#25) to ground piece (#1) from the bottom.
a. Use 2x screw carriage M10x70mm (35#), 2x Φ10 washers (#17) and 2x M10mm lock-nut (#23).
5. Connect mat reinforcement pipe (#6), fixed plate (#25) to ground piece (1#) from the bottom.
a. Use 2x screw carriage M10x70mm (#35), 2x Φ10 washers (#17) and 2x M10mm lock-nut (#23).
5
23
17
23
17
17
23
6
23
17
35
25
35
35
35
25
3
59
34
34
32
2
33
17
17
23
#17 Φ10 6pcs
#23 M10 6pcs
#33 M10X25 2pcs
#34 M10x90 2pcs
#35 M10x70 4pcs
ASSEMBLY INSTRUCTIONS |
11
Advertisement
