Error Writing To Usbxxx - Canon S830D User Manual

Error Writing to USBxxx

Ensure the printer is turned on.
If the POWER lamp is off, turn the printer on.
If the POWER lamp is flashing green, the printer is initialising. Wait until the POWER
lamp stops flashing.
Ensure the printer is securely connected to the computer.
Note
If you are using a switch box or other devices, remove and reconnect the
printer directly to the computer and try printing again.
If printing is now successful, there may be a problem with the device.
Also there could be a problem with the cable(s). Replace the cable(s) and
try printing again.
Verify the printer port status.
Note
Verify your printer port status on the Device Manager.
For information on the verification operation or correcting errors, refer to the
Windows manual.
An Error Message is Displayed on the Screen
Troubleshooting
Windows
172