Handle Installation
There is an optional
handle available (code
SBBHANDLE).
To install the handle,
loosen the plastic
wing nut (arrowed),
remove two foam
pads from underneath
Wing nut
the bath board, then
slide on to the board.
If required, adjust the brackets. Tighten the
wing nut to secure. Then reattach the foam
pads. Replacement foam pads are available
from your dealer (code SBBPAD).
Specification
Product Code
Width
Depth
4-Slat
SBB426WH
66cm (26")
24cm (9½")
SBB427WH
69cm (27")
24cm (9½")
SBB428WH
71cm (28")
24cm (9½")
6-Slat
SBB626WH
66cm (26")
36cm (14")
SBB627WH
69cm (27")
36cm (14")
SBB628WH
71cm (28")
36cm (14")
The maximum user weight for all slatted bath
boards is 190kg (30 stone).
The bath boards are constructed from sturdy
and lightweight PVC plastic.
Warranty Details
Your Drive brand product is warranted to be
free of defects in materials and workmanship
for two years from date of purchase.
This device was built to exacting standards
and carefully inspected prior to shipment. This
warranty is an expression of our confidence in
the materials and workmanship of our
products and our assurance to the customer.
In the event of a defect covered by this
warranty, we will at our option supply parts or
replace the device.
This warranty does not cover device failure
due to owner misuse or negligence, or normal
wear and tear. The warranty does not extend
to non-durable components, such as rubber
accessories, castors and grips, which are
subject to normal wear and need periodic
Height
replacement.
If you have any queries or require full
2cm (¾")
warranty conditions, please contact your Drive
2cm (¾")
stockist.
2cm (¾")
This does not affect your statutory rights.
2cm (¾")
2cm (¾")
2cm (¾")
Drive DeVilbiss Healthcare,
Heathfield Lane, Birkenshaw,
West Yorkshire BD11 2HW
www.drivedevilbiss.co.uk
Document code: SBB_Hangtag (Issued Nov 2016)
Slatted Bath Board
www.drivedevilbiss.co.uk
Need help?
Do you have a question about the SBB426WH and is the answer not in the manual?
Questions and answers