Regulatory Information - Canon S750 Quick Start Manual

Working Around the Printer Working Around the Printer
Working Around the Printer Working Around the Printer
Never use flammable sprays near the printer. Gases in the spray could cause a fire or electric
shock if they come in contact with electrical components inside the printer.
Never insert your fingers or hands inside the printer while it is printing. The printer contains
moving parts which could cause injury.
Never place anything on top of the printer, especially metal objects (such as paper clips,
staples), or containers with flammable solvents (such as alcohol, benzene or thinners).
Objects falling into the printer could cause a fire or electric shock.
If any foreign object, especially a piece of metal or liquid, falls into the printer, immediately
press the POWER button to turn off the printer, unplug the power cord, then call the Customer
Care Center. Continuing to use the printer after a foreign object has fallen into it could cause a
fire or electric shock.
Printhead and Ink Tanks Printhead and Ink Tanks
Printhead and Ink Tanks Printhead and Ink Tanks
For safety, always store printhead and ink tanks out of the reach of small children. If a child
accidentally licks or ingests any ink, consult a physician immediately.
Never subject a printhead or ink tank to shocks or excessive vibration. Shaking could cause
ink to leak and stain clothing.
Never touch the printhead or electrical contacts on a printhead immediately after removing it
from the printer. These metal parts become very hot during printing and could cause minor
burns.
Turning the Printer Off Turning the Printer Off Turning the Printer Off Turning the Printer Off
To avoid printer malfunction always use the POWER button to turn the printer on and off. Never remove the power
cord from the power outlet until you have turned off the printer by pressing the POWER button. After the POWER/
ERROR lamp goes out, you can unplug the power cord from the power outlet.
Using the Printer Near Appliances and Fluorescent Lamps Using the Printer Near Appliances and Fluorescent Lamps Using the Printer Near Appliances and Fluorescent Lamps Using the Printer Near Appliances and Fluorescent Lamps
Allow at least 6 inches clearance between the printer and another appliance or a fluorescent lamp. Electrical
noise generated by a fluorescent lamp placed too close to the printer could cause the printer to malfunction.

Regulatory Information

Regulatory Information
Regulatory Information Regulatory Information
Color Printer Model: K10211 (S750) Color Printer Model: K10211 (S750) Color Printer Model: K10211 (S750) Color Printer Model: K10211 (S750)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Appendix
47