Page 1
OPERATING MANUAL Electronic Insect Killer Model IK 2138 IK2138-210421-Rev008-UM-en...
Page 2
Content Content ..........................1 Installation and Operation of Electronic Insect Killer ............2 Check content of the packing ................2 Installation ......................2 Operation ......................2 General safety guidelines .................. 2 Quality check ..........Fehler! Textmarke nicht definiert. Cleaning and Maintenance ....................3 Cleaning ......................
Page 3
Operating Manual incl. Declaration of Conformity Installation Normally, the "IK 2138" is placed or hung between 2 and 3 m above the floor. The unit should not be placed too close to other light sources or in draughts. Make sure that the distance between the appliance and open products is large enough and that the appliance is never hung over the working area of open food.
Cleaning and Maintenance Cleaning To remove the dead insects, simply pull out the collection tray carefully. The grille and the lamps can be cleaned - with the mains plug disconnected - using a cloth or brush. Replacing the lamps First remove the plug from the socket. Loosen the screws on the two lower plastic plates and push the side panels upwards by about 2 cm.
Warranty – Liability ADE will repair or replace this product within a period of 1 years from date of delivery applying to defects occurred due to poor material or workmanship (presentation of invoice is necessary).
Low Voltage Directive 2014/35/EU RoHS Directive 2011/65/EC in the currently valid versions. This declaration loses its validity if modifications are made to the scale without our approval. Hamburg, April 2021 ADE Germany GmbH Neuer Hoeltigbaum 15 D-22143 Hamburg Manufacturer: ADE Germany GmbH Neuer Höltigbaum 15...
Need help?
Do you have a question about the IK 2138 and is the answer not in the manual?
Questions and answers