Corsair K70 PRO MINI Quick Start Manual page 4

CONNECTING VIA BLUETOOTH WIRELESS
1. Initiate Bluetooth pairing on the host device such as a phone or tablet (Bluetooth 4.0 or higher)*
2. Start Bluetooth host pairing on the keyboard, up to three devices can be paired (see below)
3. Input the code from the Bluetooth device screen on the keyboard if requested
4. When pairing completes, the Bluetooth shortcut key turns solid blue for 3 seconds
SHORTCUT
FN + (Press) Switch to Bluetooth host 1 mode
FN + (Hold)
FN + (Press) Switch to Bluetooth host 2 mode
FN + (Hold)
FN + (Press) Switch to Bluetooth host 3 mode
FN + (Hold)
*Bluetooth host device must support standard keyboard HID input.
CONNECTING VIA USB WIRED
1. Connect the keyboard via USB cable to a USB 3.0 Type-A port or better
2. The keyboard will automatically switch to USB wired mode
3. Go to iCUE device settings to select up to 8,000Hz hyper-polling with
CORSAIR AXON*
*Up to 8,000Hz hyper-polling is supported on PC and Mac. Xbox and PlayStation consoles support up to
1,000Hz polling only.
NOTE: Wireless modes can be switched to at any time by pressing a wireless shortcut. Pressing
the same shortcut again will switch back to USB wired mode.
FUNCTION
Start Bluetooth host 1 pairing*
Start Bluetooth host 2 pairing*
Start Bluetooth host 3 pairing*
ON-KEY INDICATION
Solid Blue (3 sec)
Pulsing Blue
Rapidly Blinking Blue
Solid Blue (3 sec)
Pulsing Blue
Rapidly Blinking Blue
Solid Blue (3 sec)
Pulsing Blue
Rapidly Blinking Blue
3
STATUS
Connected
Disconnected
Pairing
Connected
Disconnected
Pairing
Connected
Disconnected
Pairing