Canon i960 Series Quick Start Manual page 8

protective cap
P M
Cyan Black
(BCI-6C) (BCI-6BK)
Photo Cyan Yellow
(BCI-6PC) (BCI-6Y)
6
3 3 3 3
Hold the ink tank as shown in the
diagram and remove the protective cap.
• Do not squeeze the sides of
• Do not touch the ink port.
• Do not attempt to reattach the
4 4 4 4
Insert the magenta ink tank into the
right-hand slot. Press the top until it
clicks into place.
5 5 5 5
Use the same procedure to install the
other ink tanks in their appropriate slots.
Check the labels to make sure that each tank is in the
correct position.
• Only install the ink tanks in the positions specified
• If ink tanks are not installed in the right position,
Magenta
(BCI-6M)
Photo Magenta
(BCI-6PM)
6 6 6 6
Close the front cover.
Wait until the POWER lamp remains fully lit (about 60
seconds).
the ink tanks as this may
cause the ink to leak out and
stain your clothes and hands.
protective cap once it has
been removed.
by the labels.
colors will not be printed correctly. Immediately
reinstall the tank in the correct position and carry
out print head cleaning. For details, refer to the
User's Guide.
ink port