JVC KD-G432 Instructions Manual page 26

Symptoms
• The iPod does not turn on or does not work.
• Buttons do not work as intended.
• The sound is distorted.
• "NO IPOD" appears on the display.
• Playback stops.
• No sound can be heard when connecting an
iPod nano.
• "NO FILES" appears on the display.
• "RESET 1" – "RESET 7" appears on the
display.
• "RESET 8" appears on the display.
• The iPod's controls do not work after
disconnecting from this unit.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
• iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
26
Remedies/Causes
• Check the connecting cable and its connection.
• Update the firmware version.
• Change the battery.
The functions of the buttons have been changed. Press
M MODE before performing the operation.
Deactivate the equalizer either on the unit or the iPod.
Check the connecting cable and its connection.
The headphones are disconnected during playback.
Restart the playback operation using the control panel
(see page 16).
Disconnect the headphones from the iPod nano.
No tracks are stored. Import tracks to the iPod.
Disconnect the adapter from both the unit and iPod.
Then, connect it again.
Check the connection between the adapter and this unit.
Reset the iPod.