Activity Report - Canon imageCLASS MF3240 Series Advanced Manual

Advanced Fax
Features 1
Advanced Copy
Features
2
System Monitor
3
Reports and Lists
4
Troubleshooting
5
Appendix
6
Table of Contents
Index
● RESULT: Result of transaction
– OK: Reception successful
– NG: Reception failed
– STOP: Reception manually canceled before completion
– MEM.FULL: Memory became full during reception
● Error code: For descriptions of error codes, see Chapter
11, "Troubleshooting," in the Basic Guide.
■

ACTIVITY REPORT

1.
Press [Additional Functions].
2.
Use [ ] or [ ] to select <REPORT
SETTINGS>, then press [OK].
3.
Use [ ] or [ ] to select <SETTINGS>,
then press [OK].
4.
Use [ ] or [ ] to select <ACTIVITY
REPORT>, then press [OK].
5.
Use [ ] or [ ] to select the setting you
want, then press [OK].
<OUTPUT YES>: Prints a report after every 60 transactions.
<OUTPUT NO>: Does not print a report.
6.
Press [Stop/Reset] to return to standby
mode.
Back Previous
Report Items
The following items are displayed in the Activity Report:
● NO.: Transaction number (01 to 60)
● JOB NO.: Job number
● DATE: Date of transaction
● TIME: Time of transaction
● TX/RX: Type of transaction (transmission or reception)
● DESTINATION TEL/ID: Name and number of recipient
● PAGE: Number of pages sent or received
● DURATION: Amount of time taken for a transaction
● MODE: Mode of transaction (G3 or ECM)
● RESULT: Result of transaction (OK or NG) and error code
if applicable
● TOTAL TX PAGE, DURATION: Total number of pages sent
and total time to send them
● TOTAL RX PAGE, DURATION: Total number of pages
received and total time to receive them
TOP
Next
4-5