Advertisement
Step 3: Insert the front wheel assembly (C) through the tube on the front bike frame (A). The
top of the front wheel assembly (C) should protrude out slightly.
Step 4: Using the Allen key/Phillips head screwdriver (E), loosen and remove the screw and
nut from the handlebar (B). Insert the handlebar onto the protruding part of the front wheel
assembly (C). The handlebar will then rest on top of the front bike frame (A).
Align the two holes on the handlebar with those on the front wheel assembly (C), then using
the Allen key/Phillips head screwdriver (E), reinsert and tighten the screw into one hole
whilst holding the nut on the other.
Note:
Do not tighten the handlebar with a torque of more than 15Nm.
E (x1)
C
Screw
A
Nut
B
C
Advertisement
