Safety Instruction - infaco THD600 Original User Manual

Hide thumbs Also See for THD600:

Table of Contents

Blade holder lubrication

Safety instruction

IMPORTANT. To reduce the risk of electric discharges, injuries and ﬁre when using electric

tools, follow the fundamental safety measures indicated below. Read and follow these

instructions before using the tool, and keep the safety instructions!

Outside operations related to the use of the tool, your tool and its accessories must

be disconnected and stored in their relevant packaging.

It is imperative to disconnect your tool from all power sources for the following

operations:

Servicing.

Battery charging.

Maintenance.

Transport.

Storage.

When the tool is running, always remember to keep the hands away from the accessory head

being used. Do not work with the tool if you are tired or feeling unwell. Wear the speciﬁc

recommended personal protection equipment for each accessory. Keep the equipment out

of the reach of children or visitors.

Do not use the tool if there is a risk of ﬁre or explosions, for example in presence of

ﬂammable liquids or gases.

Never carry the charger by the cord, and do not pull on the cord to disconnect it from the

socket.

Keep the cord away from heat, oil and sharp edges.

Never use the tool at night or in bad light without setting up additional lighting. When using

the tool, keep both feet on the ground and keep as much balance as possible.

Caution: extensions can be made of conductive materials. Do not use near sources

of electricity or electric wires.

Table of Contents

Thd700 Thd600p3 Thd700p3