Table of Contents
Advertisement
Shooting Vertically
(Vertical Shutter Release)
Shooting Mode
With the camera held vertically, you can release the shutter by
pressing the FUNC./SET button in place of the shutter button. You
can also shoot with the shutter button.
1
(Rec.) Menu
See Menus and Settings (p. 30).
The default setting is [On].
2
Select a shooting mode.
3
Hold the camera verti-
cally, aim at the subject
and press the FUNC./SET
button.
Unlike the shutter button, this but-
ton does not have a halfway
stage. When the camera focuses,
it will beep twice and record the
image immediately.
To review the image immediately
after taking the shot, continue to
hold the FUNC./SET button. This
overrides the Review setting
(p. 31).
To use the FUNC. menu (p. 29) to make settings, hold the
camera horizontally.
[Vert. Shutter]
Displays when using
Vertical Shutter Release
[On].
43
Advertisement
Table of Contents
