Canon PowerShot A520 Manual page 8

Chapter 2
Downloading and Printing Images
3.
Select [CameraWindow] in the application selection
window.
CameraWindow is found by opening the [Applications] folder,
followed by the [Canon Utilities] and [CameraWindow] folders.
4.
Close Image Capture.
Auto Start
The Camera Control Window will open when the camera and
computer are connected with the interface cable.
Some camera models require you to set them to the Playback
mode to establish a connection to a computer. If your camera
requires this, see your Camera User Guide and set the necessary
communication settings.
8
ImageBrowser Software User Guide
Downloading Images to Your Computer (2/3)
Camera Control Window
REFERENCE
• If you are using a memory card reader, you can use the same
procedures to set the auto start settings as for a camera. After
the settings have been set, the Camera Control Window will
automatically open when a memory card is placed in the reader.
Although the Camera Control Window will function virtually
identically for the memory card reader, it will appear slightly
different, as shown below.
• Depending upon your camera model, a program different from
the one shown here may start up. Please refer to the manual
for the software supplied with your camera if this occurs.
Camera Control
Window with a
Memory Card Reader