Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Opvimus UMX-ETH+
Summary of Contents for Opvimus UMX-ETH+
-
Page 3: Table Of Contents
UMX-ETH+ Expansion IP card for UMX-03/0 audio matrix Table of contents INTRODUCTION ............................4 ELEMENTS .............................. 4 PLACEMENT OF THE BATTERY ......................... 5 INSERTING THE CARD..........................6 COMMISSIONING THE UNIT ........................7 5.1. Configuration of the UMX-ETH+ network addresses ................7 OPTIMAX2 SYSTEM NETWORK SPECIFICATIONS .................. -
Page 4: Introduction
UMX-ETH+ Expansion IP card for UMX-03/0 audio matrix 1. INTRODUCTION This is an additional IP interface for the Optimax2 System. This general purpose card can be used for dedicated and specific functions in one installation: • Interface to third party systems •... -
Page 5: Placement Of The Battery
UMX-ETH+ Expansion IP card for UMX-03/0 audio matrix 3. PLACEMENT OF THE BATTERY The equipment incorporates an RTC (Real-time clock) whose function is to maintain the current time. To keep the RTC powered even if the equipment is turned off, we must place a 3V lithium battery type CR2032 supplied with the equipment. It is advisable to replace the equipment battery at least every 5 years. -
Page 6: Inserting The Card
UMX-ETH+ Expansion IP card for UMX-03/0 audio matrix 4. INSERTING THE CARD Figure 3 The card occupies one slot on the matrix. To insert the card proceed as follows: 1) Disconnect the power supply to the unit (POWER SUPPLY 1 and POWER SUPPLY 2 strips). -
Page 7: Commissioning The Unit
UMX-ETH+ Expansion IP card for UMX-03/0 audio matrix 5. COMMISSIONING THE UNIT To commission the UMX-ETH+ card we must send configurations to it via an Ethernet connection. Accomplishing this requires a PC equipped with a network card and connected to the unit through a switch or directly using a network cable. The PC must have the PA Manager 4.3 software installed. -
Page 8: Optimax2 System Network Specifications
UMX-ETH+ Expansion IP card for UMX-03/0 audio matrix 6. OPTIMAX2 SYSTEM NETWORK SPECIFICATIONS OPTIMAX2 public address system supports audio and control data Communications through Ethernet and IP. Since it works on levels 3 and 4 of the OSI scale, OPTIMAX2 protocol supports Communications through routers (IP protocol) by means of the configurations of the gateways and subnetwork masks. - Page 9 UMX-ETH+ Expansion IP card for UMX-03/0 audio matrix For operating with OPTIMAX2 protocol, the following parameters must be met: Protocol Multicast address Port Others Control TCP (unicast) 10102, 10103 Local audio UDP (unicast) Between 1025 and 65536 Pre-set Multicast addresses Between 239.0.0.0 Global audio UDP (multicast)
-
Page 10: Technical Specifications
UMX-ETH+ Expansion IP card for UMX-03/0 audio matrix 7. TECHNICAL SPECIFICATIONS 2 Ethernet connections (RJ45) A and B for redundant installations. IP Layer 3 & Ethernet communication Layer 2 Network. Indicators LINK/ACT and SPEED LED indicators for each RJ45 connector Internal SD memory 16 GB 1 FAIL relay. -
Page 11: Guarantee
UMX-ETH+ Expansion IP card for UMX-03/0 audio matrix 10. GUARANTEE • Fejlure to produce the original invoice or the absence of a date on this. 1. GUARANTEE CERTIFICATE • Absence of the serial or batch number on the equipment. OPTIMUS S.A. guarantees that its products are free from material and manufacturing defects when they are first delivered to the purchaser.