Advertisement
Quick Links
Documentation Center
RAK7268 Quick Start Guide
Prerequisites
What Do You Need?
1. RAK7268/RAK7268C WisGate Edge Lite 2
2. Ethernet Cable (RJ-45 Port) – for Ethernet connection
3. A Windows/MacOS/Linux computer
WARNING
⚠
The SIM card slot of the cellular versions is not hot-swappable. Make sure the gateway is switched off
before inserting or ejecting the SIM card.
Product Configuration
Power on the Gateway
1. Attach the LoRa Antenna.
First and foremost, screw on the antenna to the RP-SMA connector on the back panel of the RAK7268/C WisGate
Edge Lite 2.
WARNING
F
Do not power the device if the LoRa Antenna port has been left open to avoid potential damage to the
RAK7268/RAK7268C WisGate Edge Lite 2.
2. Power the gateway ON.
It is recommended to use the 12 V DC adapter that comes with the RAK7268/RAK7268C WisGate Edge Lite 2.
Optionally, you can use your own PoE cable and injector since the device supports PoE.
Casing and Ports
Figure 1: RAK7268/C WisGte Edge Lite 2 Top View
Advertisement
Related Manuals for RAK RAK7268
Summary of Contents for RAK RAK7268
- Page 1 Product Configuration Power on the Gateway 1. Attach the LoRa Antenna. First and foremost, screw on the antenna to the RP-SMA connector on the back panel of the RAK7268/C WisGate Edge Lite 2. WARNING Do not power the device if the LoRa Antenna port has been left open to avoid potential damage to the RAK7268/RAK7268C WisGate Edge Lite 2.
-
Page 2: Status Led Indicators
Documentation Center Figure 2: RAK7268/C WisGate Edge Lite 2 Back Panel Status LED Indicators LEDs Status Indication Description PWR LED Power indicator - The LED is on when the device powered. Breathing LED Breathing after system is up ON - Link is up... - Page 3 ⚠ Do not power the device if the LoRa Antenna port has been left open to avoid potential damage to the RAK7268/RAK7268C WisGate Edge Lite 2. Wi-Fi AP Mode By default, the gateway will work in Wi-Fi AP Mode which means that you can find an SSID named RAK7268_XXXX on your PC's Wi-Fi Network List.
- Page 4 Documentation Center Figure 3: Web UI Login Page Access the Internet Connect through Wi-Fi Go into the Network>Wi-Fi menu and make sure to select Client in the Mode field. Enter or click "Scan" to choose your ESSID, select the right Encryption method and enter the correct Key. Figure 4: Connect through Wi-Fi Credentials NOTE: ��...
- Page 5 Documentation Center you wish (Full details in the WisGateOS User Manual Figure 5: Connect through Ethernet Settings Last Updated: 6/21/2022, 1:35:30 AM...