Page 2
B. If control is a “–KC” model (knob cover), remove knob cover as in Figure 5. C. Set thermostat knob to OFF position and then remove knob by lifting knob from shaft (see Figure 6). D. Loosen two screws from end of base plate and remove ther- mostat cover (see Figure 7).
Page 3
Figure 17. For either method, the following general calibration procedures should be followed: 1. Remove knob cover, knob and thermostat housing as per instruc- tions 3, 4 and 5 under WIRING. WIRING Figure 6...
Page 4
AR-515 300-048518-011 AR-515A 300-048518-014 AR-519 300-048518-004 AR-519D 300-048518-027 AR-715 300-048518-006 AR-715D 300-048518-029 AR-719 300-048518-007 Please refer to the Chromalox limited warranty applicable to this product at http://www.chromalox.com/customer-service/policies/termsofsale.aspx. NEMA-I Models 213-018509-002 Thermostat Cover 080-024763-001 080-024763-001 080-024763-001 080-024763-001 080-024763-001 080-024763-001 080-024763-001 080-024763-001...
This manual is also suitable for:
Ar-115Ar-115aAr-115cAr-214Ar-214dAr-215...
Show all
Need help?
Do you have a question about the PK405-18 and is the answer not in the manual?
Questions and answers