Summary of Contents for JAMES MARTIN VANITIES TAMPA 901-M29.5-GW
Page 1
V A N I T I E S 901-M29.5-GW TAMPA MIRROR LED Mirror - Installation Instructions James Martin Vanities always recommends you hire or consult a professional contractor when installing our products Note: This mirror is not intended for outdoor use IMPORTANT: Please read all instructions prior to beginning the installation of this mirror •...
Page 2
Mirror Weight: 33 Ibs (15kgs) 901-M29.5-GW TAMPA MIRROR Pre-Installation Notes • 120 Vac 60Hz wall outlet location - Required for source power • Mirror hangs in Portrait orientation • Includes hardware with easy installation via Plug and Hang Systen 20 7/8"[529mm] 28 5/8"[726mm] 3 7/8"[100mm] 12 3/4"[325mm]...
Page 3
901-M29.5-GW TAMPA MIRROR Mirror Weight: 33 Ibs (15kgs) Tools required Screw driver Drill with 3/8" bit Pencil Measuring Tape wrench level The hammer Measure the distance between the bottom Draw a horizontal line from the point a using a level Draw point c and point d of the mirror and point a.
Page 4
901-M29.5-GW TAMPA MIRROR Care and Cleaning Instructions for Mirrors • CLEANER • The best and safest cleaner for a mirror is clean, warm water used with a soft cloth. Be careful not to allow the edges of the mirror to get or remain wet over a period of time. If using a commercial glass or mirror cleaner, be sure to use a standard brand of mirror cleaner that does not contain ammonia or vinegar.
901-M29.5-GW TAMPA MIRROR MANUAL INSTRUCTION: 1) Short Touch the switch button (<1s) to turn the light and defogger ON/OFF. 2) Long Touch the switch button (>1s) to activate the dimming function. Adjust the light to the appropriate brightness. ELECTRICAL SAFETY INSTRUCTIONS: All connections must be installed by a licensed electrician, in accordance with current building codes.
901-M29.5-GW TAMPA MIRROR IMPORTANT SAFETY INSTRUCTIONS: When using an electrical furnishing, basic precautions should always be followed, including the following. Read all instructions before using (this furnishing). DANGER - To reduce the risk of electric shock: Always disconnect this furnishing from the electrical outlet before cleaning. WARNING -To reduce the risk of burns, fire, electric shock, or injury to persons.