Changing Settings - Canon PowerShot SX230 HS User Manual

If you press the qr buttons or turn the  dial during playback, the image
•
will switch. If you keep the qr buttons pressed, you can fast-forward
through images.
• The power saving function (p. 52) does not work during slideshows.

Changing Settings

You can set a slideshow to repeat, or change transition effects and the time
that slideshow images are displayed. You can choose from 6 transition
effects when switching between images.
You cannot change [Play Time] if [Bubble] is chosen in [Effect].
Choose a transition effect.
Press the op buttons or turn the  dial to
choose an effect, then press the m button.
The slideshow will start a few seconds
after [Loading image...] appears.
In filtered playback (p. 125), only images
matching a filter play back.
You can pause/restart a slideshow by
pressing the m button again.
Press the n button to stop the
slideshow.
Choose [Slideshow].
Press the n button to choose
[Slideshow] from the 1 tab, then press the
m button.
Choose a setting.
Press the op buttons or turn the  dial
to choose an item, then press the qr
buttons to adjust the setting.
If you choose [Start] and press the m
button, the slideshow starts with your
settings.
Press the n button to restore the
menu screen.
Viewing Slideshows
127