Replacing The Date Battery - Canon PowerShot SX10 IS User Manual

Replacing the Date Battery

If the Date/Time in the Set up menu appears when the camera power
is turned on, the date battery charge is low and the date and time
setting have been lost. Please purchase a lithium coin battery
(CR1220) and replace it as follows.
The date battery is preinstalled at the factory and may therefore
expire earlier than its rated lifespan after the camera has been
purchased.
Be particularly careful to keep the date batteries out of the
reach of children. Seek medical assistance immediately if a
child swallows a battery since corrosive battery fluids could
damage the stomach or intestinal wall.
1
Confirm that the camera is turned off.
2
Slide the battery cover lock and open the
cover.
3
Remove the AA-size batteries, then pull out the
battery holder by hooking your fingernail under
the center of the battery holder edge.
265