Trimming A Portion Of An Image; Button - Canon PowerShot SD770 IS Digital Elph User Manual

Trimming a Portion of an Image

You can trim a required portion of a recorded image and save it as a
new image file.
1
Select [Trimming].
1. Press the
2. In the
button to select
3. Press the
2
Select an image.
1. Use the
image for trimming.
2. Press the
• The trimming frame (the area of the
image which can be trimmed) is
displayed in green.
3
Adjust the trimming frame.
• You can change the size of the
trimming frame using the zoom
lever. However, the number of the
recording pixels of the saved image
will differ according to the size of the
trimmed image.
• You can change the position of the
trimming frame using the
or

button.

• Press the DISP. button to change
the vertical/horizontal orientation of the trimming frame.
• If a face is detected, a gray frame appears around the face
displayed in the top left screen. Trimming can be performed
around this gray frame. If multiple frames are displayed, you
can switch between frames by pressing the
button.
menu, use the
.
button.
or button to select an
button.
or
Trimming frame
, ,
121
Image after trimming
Recording pixels
after trimming
button.