Advertisement
Important
All products must be installed by licensed plumbers.
All pipework must be thoroughly flushed prior to installation, as foreign materials
may block the flow regulating device and reduce the flow of water.
1.Apply thread sealant or
teflon tape on outlet thread.
2.Pull back plate on together
with bracket body.
Apply thread sealant
or teflon tape
3.Screw shower bracket body
on to outlet. DO NOT OVERTIGHTEN.
Slide the back plate against the
wall/tile face properly.
www.nerotapware.com.au
G1/2
rubber
wahser
4. Connect bracket and hand shower with hose.
TEST & CHECK FOR LEAKS.
rubber
wahser
Advertisement
