Precautions - ViewSonic Pro10 Series User Manual

Precautions

Please follow all warnings, precautions and maintenance as
recommended in this user's guide.
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
▀■
Warning-
Do not look into the projector's lens when the lamp is on. The
bright light may hurt your eyes.
To reduce the risk of fire or electric shock, do not expose this
projector to rain or moisture.
Please do not open or disassemble the projector as this may
cause electric shock.
When replacing the lamp, please allow the unit to cool down.
Follow instructions as described on pages 65-66.
This projector will detect the life of the lamp itself. Please be
sure to change the lamp when it shows warning messages.
Reset the "Lamp Reset" function from the on-screen display
"OPTIONS | Lamp Settings" menu after replacing the lamp
module (refer to page 56).
When switching the projector off, please ensure the cooling
cycle has been completed before disconnecting power. Allow
60 seconds for the projector to cool down.
Do not use lens cap when projector is in operation.
When the lamp is approaching the end of its lifetime, the
message "Lamp Warning: Lamp life exceeded." will show
on the screen. Please contact your local reseller or service
center to change the lamp as soon as possible.
Do not look into or point the laser pointer on your remote
control into your or someone's eyes. Laser pointer can cause
permanent damage to eyesight.
Do not transport the projector with any lens installed.
vi