Table of Contents
Advertisement
Door release
Problem
The optical in-operation
indicator light is flash-
ing quickly.
The alarm tone is
sounding.
The following fault is in-
dicated via the display:
Fault F33
Cause and remedy
Before rectifying the problem:
Switch the dishwasher off.
The door does not open automatically.
There may be a technical fault.
Open the door manually (see "Before using for the
first time" chapter, "Opening the door" section)
and switch the dishwasher off and then back on
again.
If the same fault message appears again, call
Miele Service.
The door locking pins do not retract after the door is
opened.
There may be a technical fault.
Switch the dishwasher back on.
If the same fault message appears again, call
Miele Service.
Problem solving guide
65
Advertisement
Table of Contents
