Related Manuals for Toyo SOT-EQ80 Series
Summary of Contents for Toyo SOT-EQ80 Series
- Page 1 DS4-2499D Optical Transmitter SOT-EQ80 Series Operation Manual TOYO ELECTRIC CORP. - 1 -...
-
Page 2: Table Of Contents
DS4-2499D Contents 1. Introduction 3 2. Outline 3. Configuration ... -
Page 3: Introduction
DS4-2499D 1. Introduction Thank you for choosing our SOT-EQ80 Series transmitter. For correct operation of the product, this manual must be read carefully before use. 2. Outline This equipment transmits data utilizing the light transmitted through the space. -
Page 4: Major Specifications
DS4-2499D 4. Major Specifications Item Specification Model... -
Page 5: Names And Functions Of Components
DS4-2499D 5. Names and Functions of Components ⑥ ⑧ ① ⑭ ⑤ ⑪ ③ ④ ② ⑦ ⑨ ⑬ ⑫ ⑩ ⑮ ⑯ (1) Power indicator lamp (POW) Shows red when power is supplied to the main unit. ... -
Page 6: Installation
DS4-2499D 6. Installation ... - Page 7 DS4-2499D (3) Installation intervals When plural transmitters are to be installed or a transmitter is used near another photoelectric sensor, they shall be installed at sufficient intervals to prevent optical interference. Exa mple 1 例 １ ． Type B Type A Ａタイプ...
-
Page 8: Electric Connections And Wiring
DS4-2499D 7. Electric Connections and Wiring (1) Power/aux. output connectors Signal name Brevity code Terminal No. - Page 9 DS4-2499D (3) Connector arrangement (on the rear panel) (4) (5) 1) Power/aux. output connector Pin terminal 2) Check terminal The Check terminal on the rear panel shall be checked on the DC range with a tester of 10 kΩ/V or more.
-
Page 10: Setting Switches
DS4-2499D 8. Setting Switches (1) Ethernet settings Effective Ineffective Auto negotiation... -
Page 11: Adjustment Of The Optical Axis
DS4-2499D 9. Adjusting of the Optical Axis During the adjustment of optical axis, damaged data could come out of signal (Ethernet) connector. -
Page 12: Operation
DS4-2499D 10. Operation (1) The data frames to be sent to the receiving unit are first sent to the transmission buffer of the equipment from an external device. - Page 13 DS4-2499D Condition Unit 1 Unit 2 Light intensity Light intensity Light intensity received by received by the output output received by this unit other unit this unit Normal L1 or more L1 or more The same with Insufficient light CD only CD or more The same with intensity (cleaning or...
-
Page 14: Signal Interface
DS4-2499D 11. Signal Interface Signal connector Terminal No. -
Page 15: Maintenance And Inspection
DS4-2499D 12. Maintenance and Inspection (1) Check for any stain on the front cover periodically. The equipment optically transmits data, and stain on the front cover may cause a communication error. -
Page 16: Outside Dimensions
DS4-2499D 14. Outside Dimensions Rear p an el Ligh t rece iv ing u n it Ligh t em itt ing un it... -
Page 17: Guarantee
For further information about the product, please contact our sales office nearby or the Machinery Division, Kamiya Factory. TOYO ELECTRIC CORP., Electric Machinery Div. Head Office Hikisawa 1-39, Kamiya-cho, Kasugai, Aichi, Japan 480-0393 ... -
Page 18: Revision History
DS4-2499D 17. Revision History Date Content of revision Remark 2006.11.04 First edition...
Need help?
Do you have a question about the SOT-EQ80 Series and is the answer not in the manual?
Questions and answers