Related Manuals for Toyo SOT-ES100 Series
Summary of Contents for Toyo SOT-ES100 Series
- Page 1 DS4-2511C Optical Transmitter SOT-ES100 Series Operation Manual TOYO ELECTRIC CORP. - 1 -...
-
Page 2: Table Of Contents
DS4-2511C Contents 1. Introduction 3 2. Outline 3. Configuration ... -
Page 3: Introduction
DS4-2511C 1. Introduction Thank you for choosing our SOT-ES100 Series transmitter. For correct operation of the product, this manual must be read carefully before use. 2. Outline This equipment transmits data utilizing the light transmitted through the space. -
Page 4: Major Specifications
DS4-2511C 4. Major Specifications Item Specification Model... -
Page 5: Names And Functions Of Components
DS4-2511C 5. Names and Functions of Components ⑥ ⑧ ⑥ ⑧ (13) ① (10) ⑤ ⑩ (10) (7)(8) (11) (12) ⑦ (11) (14) (15) -
Page 6: Installation
DS4-2511C 6. Installation ... - Page 7 DS4-2511C (3) Installation intervals When plural transmitters are to be installed or a transmitter is used near another photoelectric sensor, they shall be installed at sufficient intervals to prevent optical interference. Exa mple 1 例 １ ． Type B Type A Ａタイプ...
-
Page 8: Electric Connections And Wiring
DS4-2511C 7. Electric Connections and Wiring (1) Power/aux. output connectors Signal name Brevity code Terminal No. - Page 9 DS4-2511C (3) Connector arrangement (on the rear panel) (4) (5) 1) Power/aux. output connector Pin terminal 2) Check terminal The Check terminal on the rear panel shall be checked on the DC range of a tester of 10 kΩ/V or more.
-
Page 10: Setting Switches
DS4-2511C 8. Setting Switches (1) Ethernet settings Effective Ineffective Auto negotiation... -
Page 11: Adjustment Of The Optical Axis
DS4-2511C 9. Adjusting of the Optical Axis During the adjustment of optical axis, damaged data could come out of signal (Ethernet) connector. -
Page 12: Operation
DS4-2511C 10. Operation ... -
Page 13: Signal Interface
DS4-2511C 11. Signal Interface Signal connector Terminal No. -
Page 14: Maintenance And Inspection
DS4-2511C 12. Maintenance and Inspection (1) Check for any stain on the front cover periodically. The equipment optically transmits data, and stain on the front cover may cause a communication error. -
Page 15: Outside Dimensions
DS4-2511C 14. Outside Dimensions Ligh t rece iv ing u nit Ligh t rece iv ing u n it Ligh t em itt ing un it... - Page 16 DS4-2511C - 16 -...
-
Page 17: Guarantee
For further information about the product, please contact our sales office nearby or the Machinery Division, Kamiya Factory. TOYO ELECTRIC CORP., Electric Machinery Div. Head Office Hikisawa 1-39, Kamiya-cho, Kasugai, Aichi, Japan 480-0393 ... -
Page 18: Revision History
DS4-2511C 17. Revision History Date Content of revision Remark 2006.12.06 First edition...
Need help?
Do you have a question about the SOT-ES100 Series and is the answer not in the manual?
Questions and answers