Advertisement
To charge the battery
1
Plug one end of the USB cable into the charger (or into the USB port of a
computer).
2
Plug the other end of the cable into the Micro USB port on your Mono
Bluetooth® Headset .
Turning the headset on and off
To turn on the headset
•
Press and hold down the Power key until the notification light turns green.
To turn off the headset
•
Press and hold down the Power key until the red notification light flashes
once.
Pairing the headset with compatible devices
Before you can use the headset, you need to pair it with a Bluetooth
device, for example, a phone. There are two ways to pair the headset: manually,
and automatically using NFC. After successful pairing, the headset connects to the
Bluetooth
range. After that, you can also pair the headset with a second Bluetooth
compatible device in the same way.
To manually pair the headset with a Bluetooth
1
Make sure the Bluetooth
2
Turn off the headset.
3
Headset: Press and hold down the Power key until a green notification light
starts flashing rapidly.
4
Bluetooth
list of available devices.
5
Bluetooth
is required, enter "0000".
To automatically pair your headset with a Bluetooth
Downloaded from
ManualsNet.com
®
compatible device as soon as the headset is turned on and within
®
device has the Bluetooth
®
device: Scan for Bluetooth
®
device: Follow the pairing instructions that appear. If a passcode
This is an internet version of this publication. © Print only for private use.
search engine
®
device
®
function turned on.
®
devices, then select MBH10 in the
®
device
4
®
compatible
®
Advertisement
