Table of Contents
Advertisement
GENERAL SAFETY WARNINGS
WARNING: Before using this tool or any of its accessories, read this manual
and follow all Safety Rules and Operating Instructions. The important
precautions, safeguards and instructions appearing in this manual are not
meant to cover all possible situations. It must be understood that common
sense and caution are factors which cannot be built into the product.
This instruction manual includes the following:
General Safety Warnings
•
Specific Safety Rules
•
and Symbols
Functional Description
•
EYE, EAR & LUNG PROTECTION
WEAR CSA APPROVED
EYE PROTECTION
ALWAYS WEAR EYE PROTECTION THAT CONFORMS WITH CSA
REQUIREMENTS or ANSI SAFETY STANDARD Z87.1
FLYING DEBRIS can cause permanent eye damage. Prescription eyeglasses
ARE NOT a replacement for proper eye protection. WARNING: Non-compliant
eyewear can cause serious injury if broken during the operation of a power tool.
ALWAYS WEAR EAR PROTECTION
WARNING: Use hearing protection, particularly during extended periods of
operation of the tool, or if the operation is noisy.
WEAR A DUST MASK THAT IS DESIGNED TO BE USED WHEN OPERATING A
POWER TOOL IN A DUSTY ENVIRONMENT.
WARNING: Dust that is created by power sanding, sawing, grinding, drilling, and other
construction activities may contain chemicals that are known to cause cancer, birth
defects, or other genetic abnormalities. These chemicals include: Lead from lead-based
paints; Crystalline silica from bricks, cement, and other masonry products; Arsenic and
chromium from chemically treated lumber. The level of risk from exposure to these
chemicals varies, according to how often this type of work is performed. In order to
reduce exposure to these chemicals, work in a well-ventilated area, and use approved
safety equipment, such as a dust mask that is specifically designed to filter out
microscopic particles.
3
4
/
" Angle Grinder - Owner's Manual
1
2
Assembly
•
Operation
•
Maintenance
•
Accessories
•
WEAR EAR
PROTECTION
WEAR A
FACE MASK
Advertisement
Table of Contents
